Layout and Design: Gigabyte GA-X79-UD7

Published by Marc Büchel on 02.12.11
Page:
« 1 (2) 3 4 5 »

Spezifikationen / Lieferumfang

CPU Intel Socket 2011 2nd Generation i7 Processors
Chipset Intel X79
Memory 4 x DIMM max 32 GB, DDR3 2133 / 2000 / 1866 / 1600 / 1333 / 1066 MHz
Quad Channel
Multi-GPU NVIDIA 4-Way SLI
AMD 4-Way CorssFireX
Slots 4 x PCI-Express 3.0/2.0 x16 (quad at x8/x8/x8/x8, triple at x8/x8/x8, dual at x16/x16)
3 x PCI-Express x1
Sound Realtek ALC898
Storage 2 x SATA 6.0 Gb/s (Intel, RAID 0, 1, 5, 0+1)
4 x SATA 3.0 Gb/s (Intel, RAID 0, 1, 5, 0+1, JBOD)
4 x SATA 6.0 Gb/s (Marvell 88SE9172)
Bluetooth Bluetooth 4.0, WiFi Module incl. 2 anntenna
LAN 1 x Intel Gigabit LAN
I/O internal
  • 1 x 24-pin ATX main power connector
  • 2 x 8-pin ATX 12V power connectors
  • 2 x PCIe power connectors
  • 6 x SATA 6Gb/s connectors
  • 4 x SATA 3Gb/s connectors
  • 1 x CPU fan header
  • 6 x system fan headers
  • 1 x front panel header
  • 1 x front panel audio header
  • 1 x S/PDIF Out header
  • 3 x USB 2.0/1.1 headers
  • 1 x USB 3.0/2.0 header
  • 1 x Clear CMOS jumper
  • 1 x power button
  • 1 x reset button
  • 1 x onboard voltage measurement module
  • 1 x Gear button
  • 1 x CPU BCLK Down button
  • 1 x CPU BCLK Up buttonv
  • 1 x CPU Ratio Down button
  • 1 x CPU Ratio Up button
  • 1 x Trusted Platform Module (TPM) header
  • I/O Back Panel
  • 1 x PS/2 keyboard/mouse port
  • 1 x CPU overclocking button
  • 1 x BIOS switch button
  • 1 x Clear CMOS button
  • 8 x USB 2.0/1.1 ports
  • 2 x USB 3.0/2.0 ports
  • 1 x RJ-45 port
  • 1 x optical S/PDIF Out connector
  • 5 x audio jacks
  • Forfactor XL-ATX (32.4cm x 25.3 cm)
    BIOS Bios (2 x 64 Mbit flash ROM, EFI AMI BIOS)




    Uboxing the GA-X79-UD7 shows an awful lot of accessories. Next to a complete set of SATA cables one will find a quad SLI bridge, a triple SLI bridge, a CrossFire bridge an SLI bridge as well as a 3.5 inch front mount panel with two USB 3.0 ports. Furhtermore there are the different manuals, the wireless LAN and bluetooth expansion card as well as software and drivers on DVD.

    Features

    3D Power Meanwhile Gigabyte also makes use of digital power designs on their motherboards. What it does is that it controls the flow of power to both CPU and memory. Gigabyte in this case promises maximum stability.
       
    3D BIOS With their X79 motherboards Gigabyte introduces their interpretation of a UEFI-BIOS. Using a new Gigabyte board you can choose from a 3D Mode or the Advanced Mode. In 3D Mode one can see a picture of the board in BIOS. If you hover over the different areas you can select them and afterwards change the related settings. On the other hand there is the more standard advanced mode which come with a well-known tab based user interface.
       
    OC VRM With this feature Gigabyte addresses extreme overclockers. With the UD7 you get a power design that features 16 phases which get their power via two 8-Pin-Molex power connectors. Together they can provied a CPU with up to 1'500 Watts. Regarding the capacitors Gigabyte uses POScaps as well as PowerPAK MOSFETs.
       
    OC Touch OC-Touch enables overclockers to quickly and easily get more performance from their system. With onboard OC-Touch buttons, users are able to manually raise and lower the CPU ratio, change BCLK settings, and even change BCLK stepping to either 1 MHz or 0.3 MHz. These changes can be made at any time whether in the BIOS or Windows and in real-time without the need for rebooting, so that users can quickly fine-tune to find their CPU’s maximum frequency. The onboard 4G Ready button allows novice overclockers to automatically reach 4GHz, while advanced users can use it to get to 4GHz before continuing with OC-Touch to quickly find their CPU’s best margin. Onboard voltage measurement modules are also included to help users to conveniently monitor component voltages.
       
    OC-PEG OC-PEG provides two onboard SATA power connectors for more stable PCIe power when using 3-way and 4-way graphics configurations. Each connector can get power from a different phase of the power supply, helping to provide a better, more stable graphics overclock. The independent power inputs for the PCIe slots helps to improve even single graphics card overclocking. For 4-way CrossFireX, users must install OC-PEG to avoid over current in the 24pin ATX connector. The entire board also features POScaps, helping to simplify the insulation process so overclockers can quickly reach subzero readiness.


    Page 1 - Introduction Page 4 - Connectors and I/O
    Page 2 - Specifications / Delivery Page 5 - Conclusion
    Page 3 - Layout  



    Discuss this article in the forums




    Navigate through the articles
    Previous article Review: ASRock X79 Extreme4 Review: ASUS Rampage IV Formula Next article
    comments powered by Disqus

    Layout and Design: Gigabyte GA-X79-UD7 - Motherboards > Intel > X79 - Reviews - ocaholic